130 BCD Cyclocross Chainrings
130 mm BCD chainrings to fit standard cranks with 5 bolt, 130 mm spiders.
All chainrings feature our Drop-Stop tooth design and are made from 7075 Aluminum.
Does NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800. or Campy CX10/11. They WILL work with 11 speed chains.
Strongly recommend a 10 or 11 speed chain. If using a 9 speed drivetrain, plan to use a 10 speed chain (it will shift fine), as the 9 speed chain fits too loosely on the ring.
*** Be sure to order a colorful set of Wolf Tooth chainring bolts to go with you new ring! Order the 6mm (short) bolt+nut combo. ***
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper or clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck.
38T important note: The chain will contact the spider arm slightly when using the 38T chainring (see photo below). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring.
Product weights: 38t - 52g, 40t - 60g, 42t - 62g, 44t - 79g
Free shipping on all orders over $50 USD.
If you are unsure about the BCD on your crankset please refer to our printable guide. Make sure to check the option in the print settings to print "actual size" (or uncheck the "fit to page" option). Put your existing chainring over the page and determine which bolt pattern on the page matches the bolt holes on your chainring.